Pioneer HTZ-LX61DV Operating Instructions Manual page 89

Additional information
XM radio
Message Description
Check XM Tuner The XM Mini-Tuner is not installed in
the XM Mini-Tuner Dock or the XM
Mini-Tuner dock is not connected to
this receiver.
Check Antenna The XM antenna is not connected to
the XM Mini-Tuner Dock or the XM
antenna cable has become
damaged.
Loading
The XM Mini-Tuner is acquiring
audio or program information from
the XM satellite signal. This
message can also occur in weak XM
signal conditions.
No Signal The XM Mini-Tuner is not receiving
the XM satellite signal. Something
may be blocking the XM antenna's
view of the satellites or the antenna
is not properly aimed.
UNAUTH
The radio is being updated with the
latest encryption code.
Off Air
The XM channel you selected is not
currently broadcasting.
CH Unavailable The selected channel is not
available. The channel may have
been reassigned to a different
channel number. This message may
occur initially with a new radio or a
radio that has not received XM's
signal for an extended period.
XM***/ – – – – – – No artist name or song title is
available for this selection.
Upgrade XM Tuner The connected XM CNP-1000 is
incompatible. This receiver features
advanced technology that is
designed for use with the XM Mini-
Tuner.
XM Power Error
A short-circuit occurring in the
antenna or surrounding antenna
cable.
Action
Confirm the XM Mini-Tuner is fully seated in the
dock and check the XM Mini-Tuner dock cable is
connected to this receiver.
Check that the XM antenna is securely connected
to the XM Mini-Tuner Dock and check the antenna
cable for damage. Replace the XM antenna if the
cable is damaged.
This message should disappear in a few seconds in
good signal conditions. If you see this message
often, reposition the XM antenna to get better
signal reception.
Check for antenna obstructions and reposition the
XM antenna to get better signal reception. See
instructions supplied with the XM Mini-Tuner and
Dock for antenna installation information.
Wait until the encryption code has been updated.
Channels 00 and 01 should function normally.
Check back at a later time; in the meantime, select
another channel.
Consult the latest channel guide at
www.xmradio.com for the current list of channels.
For cases of a new radio or a radio that has not
received XM's signal for an extended period, allow
the radio to receive the XM satellite signal for at
least 5 minutes and then try to select the channel
again.
No action required.
Contact XM Listener Care (1-800-967-2346) and ask
about upgrading your XM CNP-1000 to an XM Mini-
Tuner.
Have the receiver model name and CNP-1000 XM
Radio ID number ready beforehand, and explain
that the receiver is displaying the message
"Upgrade XM Tuner."
If you already have an XM Mini-Tuner connected
and you see this message, turn off the receiver,
make sure the XM Mini-Tuner is properly seated in
the Mini-Tuner Dock, and then turn the receiver On
again. If the message reappears, contact XM
Listener Care and explain the issue that you're
experiencing and the corrective actions you've tried.
Make sure that there is nothing unusual with the
antenna or antenna cable. Switch the power off,
then back on again.
14
89
En