To change the AM tuning interval
(except for European models)
The default setting for AM tuning interval is
9 kHz (or 10 kHz for some areas). Use the
buttons on the unit to perform this operation.
Press TUNER FUNCTION on the remote
1
or press FUNCTION on the unit
repeatedly to select the AM station.
2
Press ?/1 (power) to turn off the system.
3
Press and hold FUNCTION and press ?/
1 (power) on the unit.
"STEP 9K" or "STEP 10K" appears in the display.
When you change the interval, all the AM preset
stations are erased.
Presetting radio stations
You can preset your desired radio stations.
1
Tune in the station you wish to
preset.
2
Press TUNER MEMORY .
3
Press TUNE +/– repeatedly to
select a preset number.
If another station is already assigned to
the selected preset number, the station
is replaced by the new station.
4
Press
station.
"COMPLETE" appears in the display .
5
Repeat steps 1 through 4 to
register other stations.
You can preset up to 20 FM, 10 AM
(CMT-BT80W) and 20 DAB/DAB+ (CMT-
BT80WB) stations.
Downloaded From Disc-Player.com Sony Manuals
Preset number
to register the
To tune in to a preset radio
station
Press TUNING MODE repeatedly until
"PRESET" appears in the display , and then
press TUNE +/– to select the preset number
to which the desired station is registered.
Running the DAB Automatic
Scan manually (CMT-
BT80WB only)
Before you can tune in DAB/DAB+ stations,
you must perform a DAB Initial Scan.
When you have moved to another area, also
perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press TUNER FUNCTION
repeatedly until "DAB" appears in
the display .
Press FUNCTION on the unit repeatedly
until "DAB" appears in the display .
2
Press OPTIONS to display the
setting menu.
3
repeatedly to
Press
/
select "INITIAL," then press
4
repeatedly to
Press
/
select "OK," then press
Scanning begins. The scanning
progress is indicated by asterisks
(*******). Depending on the DAB/DAB+
services available in your area,
scanning may take a few minutes.
When scanning is complete, a list of
available services is created.
Notes
•
If your country or region does not support DAB/
DAB+ broadcast,"NO SERV" appears.
•
This procedure clears all previously stored
presets.
•
Before unplugging the DAB/FM antenna, make
sure the system is turned off to preserve your
own DAB/DAB+ settings.
.
.
49
GB