Table of Contents
Advertisement
9
Select the SSID of the wireless
LAN router/access point, then
input the Security Key (if
applicable).
10
Select [Apply].
11
Select [OK] in the displayed
window.
The system restarts automatically.
12
Connect the Mac or PC to the
wireless LAN router/access point
to be used.
Note
This procedure needs to be completed within 30
minutes. If you cannot complete, start over from
step 3.
Option 3: Method for using a
WPS push button at the
access point supporting
WPS
1
Check whether the network (LAN)
cable (not supplied) is
disconnected.
Disconnect the network (LAN) cable
while the AC power is disconnected if
the network (LAN) cable is connected.
Downloaded From Disc-Player.com Sony Manuals
SSID
2
Press OPTIONS to display the
setting menu.
3
repeatedly to
Press
/
select "WPS," then press
"OK" appears in the display .
To cancel the setting, press / to
•
select "CANCEL," then press
4
.
Press
"WPS" flashes.
5
Hold down the WPS button on
the access point for more than 3
seconds.
* The position and the shape of the WPS
button are different depending on the
model of the access point.
6
"CONNECT" lights up after "WPS"
flashes for several tens of
seconds in the display window of
the system. Make sure that
lights up after a connection has
been made.
Tip
Refer to the operating instructions of your
wireless LAN router/access point for details
on the WPS button.
.
.
WPS button*
35
GB
Advertisement
Table of Contents
