Using optional audio components
1
Press VOLUME to turn down
the volume.
Press VOL on the unit.
2
Connect additional audio
component to the AUDIO IN jack
(page 12).
Connect optional external equipment
with an audio connecting cable (not
supplied).
3
Press AUDIO IN FUNCTION .
Press FUNCTION on the unit
repeatedly until "AUDIO IN" appears in
the display .
50
GB
Downloaded From Disc-Player.com Sony Manuals
4
Start playback of the connected
component.
Adjust the volume on the connected
component during playback.
5
Press VOLUME +/ to adjust
the volume.
Note
The system may enter Standby mode
automatically if the volume level of the connected
component is too low. Adjust the component's
volume accordingly. See "Setting the Automatic
Standby function" (page 51).