Help Guide | Connecting To A Wi-Fi Network Using The Wi-Fi Protected Setup Wps) Button Of The Wireless Router - Sony SRS-HG1 Help Manual

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Connecting to a Wi-Fi network using the Wi-Fi Protected Setup (WPS) button of
the wireless router
If your wireless router has a Wi-Fi Protected Setup (WPS) button, you can connect to the Wi-Fi network by this method.
To check if your wireless router is compatible with Wi-Fi Protected Setup (WPS), refer to the operating instructions of your router.
Do the following before starting.
Place the speaker closer to the wireless router.
Turn on the speaker.
1
Press and hold the UPDATE/WPS button on the rear of the speaker until a beep is heard (for about 2
2
seconds).
The LINK indicator flashes in orange and the NETWORK indicator lights up.
Press the Wi-Fi Protected Setup (WPS) button* of the wireless router.
3
Operate within 90 seconds after pressing the UPDATE/WPS button of the speaker. Depending on the wireless router, press
and hold the Wi-Fi Protected Setup (WPS) button of the wireless router for a few seconds. For details, refer to the operating
instructions of your wireless router.
* The position and shape of the Wi-Fi Protected Setup (WPS) button differ depend on the wireless router.
94