Table of Contents
Advertisement
∫ Enjoying multi-channel surround sound
Coaxial cable
Amplifier with a built-in
decoder or a decoder-
amplifier combination
COAXIAL IN
≥ You cannot use DTS Digital Surround decoders not suited to DVD.
Change "PCM OUTPUT", "DOLBY DIGITAL" and "DTS" (➜ 17, "AUDIO" menu).
∫ Connect the AC mains lead last
To household mains socket
∫ Connect to the ground terminal
Ground the unit by connecting a copper wire to the screw on the back of the unit and the
ground terminal to prevent static electricity buildup caused by the karaoke microphone.
Back of the unit
AC mains lead
To the ground terminal
SIGNAL
EARTH
STEP 2
The remote control
∫ Batteries
≥ Insert so the poles (i and j) match those in the
remote control.
≥ Do not use rechargeable type batteries.
R6/LR6, AA
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese
batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the
fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store
in a cool, dark place.
∫ Use
Aim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of
7 m directly in front of the unit.
STEP 3
Quick setup
Preparation
Turn on the television and select the appropriate video input on the television.
1 Press [Í]
.
2 Press [SETUP].
QUICK SETUP screen appears.
3 Follow the on-screen instructions and select the settings with [3 4]
and [ENTER].
≥ Press [RETURN] to return to previous screen.
4 Press [ENTER] to finish setting.
5 Press [SETUP] to exit the setup menu.
≥ To change these settings later, select "QUICK SETUP" (➜ 17, "OTHERS" menu).
7
7
Advertisement
Table of Contents
