Keys Fitness HealthTrainer HT403T Owner's Manual page 7

Assembly
4. Attach the top rail to the left and right
uprights using two Allen Bolts M5*15 (# 26)
and two Arc Washers (#41).
You may now firmly tighten all hardware.
Refer to Figure 4.
Note: Be careful not to pinch the wire har-
ness.
5. Remove the four M5*20mm screws from
the back of the console. Set aside.
Connect Console Wire Harness being careful
not to pinch the wires.
Using four screws previously removed from
console, attach console to the Top Rail. Refer
to Figure 5.
You have completed the assembly of your HealthTrainer 403T Treadmill.
CONGRATULATIONS!!!!!!!!
Figure 4: Top Rail Assembly
CONSOLE
Figure 5: Console Wire Connections
7