Keys Fitness HealthTrainer HT-740T Owner's Manual page 7

Assembly
3. Slide the right upright onto the base
frame. Secure the right upright to the
base frame by using four bolts M10x25
and four washers 10.
4. Feed the console wire coming out of the
console through the tube of the left handle-
bar. Connect the EKG harness and the
toggle harness coming from the handlebar
to the EKG harness and the toggle harness
coming from the console.
Secure the left and right handlebars to con-
sole using two bolts M8x50 and two wash-
ers M8 per side.
NOTE: Make sure not to pinch or screw
through any wires when securing the left
handlebar.
Figure 3: Right Upright Installation
Bolt M8x50
EKG
Harness
Toggle
Harness
Left Handlebar
Figure 4: Console Assembly
7
Bolt M10x25
Washer 10
Console Harness
Washer M8
Toggle
Harness
EKG
Harness
Right Handlebar