JUKI LZ-2290A Instruction Manual page 88

No. Item
Function of Function of reverse feed stitching on the way
30
reverse feed
0 : Function of reverse stitching on the way is not operative.
stitching on
1 : Function of reverse feed stitching on the way is operative.
the way
Number of
31 Number of stitches of reverse feed stitching on the way.
stitches of
reverse feed
stitching on
the way
Effective
Effective condition of reverse feed stitching on the way
32
condition of
0 : Function is not operative when the sewing machine stops.
reverse feed
1 : Function is operative when the sewing machine stops.
stitching on the
way when the
sewing machine
is stopping.
Thread trimming
33 Thread trimming function by reverse feed stitching on the way
*
function by
0 : Automatic thread trimming function after completion of
reverse feed
stitching on the
1 : Automatic thread trimming after completion of reverse feed
way
Number of
35 Lowest speed by pedal
*
rotation at a
low speed
Number of
36 Thread trimming speed
rotation of
thread
trimming
Number of
37 Sewing speed at the start of sewing (soft-start)
rotation of
soft-start
38 One-shot Setting of number of revolution at the time of one-shot automatic
speed sewing
Pedal stroke Position where the sewing machine starts rotating from pedal
39
*
at the start of
neutral position (Pedal stroke)
rotation
Low speed
Position where the sewing machine starts accelerating from
40
*
section of
pedal neutral position (Pedal stroke)
pedal
Position where the cloth presser starts lifting from pedal neutral
Starting
41
*
position of position (Pedal stroke)
lifting presser
foot by pedal
Starting
Starting position of lowering presser foot
42
*
position of
Stroke from the neutral position
lowering
presser foot
Position 2 where the thread trimming starts from pedal neutral
43 Pedal stroke 2
*
position (When the function of lifting presser foot by pedal is
for starting
provided.) (Pedal stroke)
thread
trimming
Pedal stroke
44 Position where the sewing machin reaches its highest sewing
*
for reaching
speed from pedal neutral position (Pedal stroke)
the maximum
number of
rotation
Compensation
Compensation value of the pedal sensor
45
*
of neutral
point of the
pedal
Auto-lifter Auto-lifter selection
46
*
selecting 0 : Solenoid drive system
1 : Pneumatic drive system
function
Limitation time of waiting for lifting solenoid type auto-lifter device
Holding time
47
*
of lifting auto-
lifter
Pedal stroke 1 Position where thread trimming starts from pedal neutral position
48
*
for starting (Standard pedal) (Pedal stroke)
thread
trimming
Lowering time Lowering time of presser foot after the pedal has been depressed.
49
*
of presser foot (Start of rotation of the sewing machine is delayed during this time.)
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions. (Descriptions of setting in
this list are the standard values at the time of delivery of LZ-2290A.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
82
Description
reverse feed stitching on the way is not operative.
stitching on the way is performed.
Setting Panel display
Setting range
level Standard set value
2 1/0
0 to 19
2
2 1/0
2
1/0
20 to 400
1
20 to 250
2
150 to 5500 S-SOFT
1
200 to 5500
1
2
10 to 50
2
10 to 100
2
-60 to -10
2
8 to 50
2 -60 to -110
P-TRM2
2
10 to 150
2 -15 to 15
2
1/0
2
10 to 600
2
P-TRM1
-60 to -10
2
0 to 250 T-FLWT
Ref.
Page
87
OBT
0
N-OBT 87
4
OBTS 87
0
OBTT 87
0
S-POS
200
S-TRM
180
1200
S-ASS
2000
P-SSP
30
P-LSA
60
P-FLW
-21
P-FLD
10
-51
P-MAX
150
P-ANP
0
FLSEL
0
88
88
T-FL
60
-51
89
140