Removing And Replacing The Casing Cover (Ventilation Slot Cover) To Get Rid Of Dust - Fujitsu Lifebook S710 Operating Manual

Working with the notebook
Removing and replacing the casing cover (ventilation
slot cover) to get rid of dust
To ensure optimum cooling of your notebook's components, you should clean
the ventilation slots of the cooling fan after prolonged use.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small hand-held vacuum cleaner.
If necessary, use a dry brush to remove dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that no liquid enters the device.
Be careful not to damage the ventilation fins. Do not use hard objects for cleaning.
To avoid overheating of the device, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for removal, see chapter
38
Downloaded from LpManual.com Manuals
"Preparing to remove components", Page
2
1
1
2
► Slide the ventilation slot cover in the
direction of the arrow (1).
► Lift the ventilation slot cover out
of the bay (2).
► Clean the dust chamber with a dry brush.
► Place the ventilation slot cover in the bay (1).
► Slide the ventilation slot cover in the
direction of the arrow (2).
► Complete the removal, see chapter
"Finishing component removal", Page
Fujitsu Technology Solutions
66.
72.