Sennheiser SpeechLine IS microphone series Instruction Manual page 22

Mounting and installing the products
MZH 30xx MEG 14-40
MZFS 60|80
MZH 30xx-L MEG 14-40-L
14-40-L-II
MZS 31 MZT 30 MZT 30-L
B) Mounting the MEG/MZH gooseneck microphone to the MZFS floor stand
Connect the XLR connector of the gooseneck microphone to the
corresponding socket of the floor stand.
C) Mounting the MEG/MZH gooseneck microphone to the MZT table
mount/MZS shock mount
Once you have chosen a position for the product (see page 16):
1 Drill a hole with the following diameter through the mounting surface
MEG
(plate thickness 10 mm - 65 mm):
– 24 mm for the MZT 30 (-L) table mount
– 51 mm for the MZS 31 shock mount
1
2 Insert the table mount or the shock mount into the drilled hole.
3 Connect the XLR connector of the gooseneck microphone to the
corresponding socket of the MZT 30 (-L) table mount/MZS 31 shock
mount.
2
MZT 30 MZS 31
XLR-3
MZT 30 MZT 30-L MZS 31
24 mm
10 mm –
65 mm
3
MZT 30-L
SpeechLine
MEG 14-40
MZH 30xx
MZFS 60
MZFS 80
51 mm
IS microphone series | 21