Optional Accessories
Optional Accessories
Mounting kit
●
Extension arm for mounting kit
●
IP66 outdoor rated 802.3AT power injector
●
Mounting kit for outdoor IP 66 802.3AT power injector
●
External antenna options
●
Basic Troubleshooting
Basic troubleshooting recommendations for the Altitude 4760 Series Access Point are listed
in the following table:
Indication
LEDs are not lit
No Ethernet connectivity to the unit Verify that Ethernet data cable is properly connected to PoE
No wireless connectivity to the unit Verify that antennas are installed correctly
Altitude™ 4760 Series Access Point Installation Guide
Response
No power to device:
Verify 802.3at compatible source is connected via PoE
Verify AC source to PoE injector
Unit was configured with LEDs disabled
injector
66