Safety Notes; Declaration Of Conformity; Switch-On; Switch-Off - Blaupunkt Bluetooth-USB Interface User Manual

ENGLISH
We provide a manufacturer's warranty for our
products purchased within the European Union.
You can view the warranty terms at
punkt.de
or request them directly from:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim

Safety notes

Before drilling holes for mounting, ensure that
no routed cables or vehicle components are
damaged!
Do not install the USB socket, microphone and PTT
button in the deployment area of the airbag, and
ensure that the tray is safe and solid so that passen-
gers in the vehicle are not at risk during emergency
braking. Use cable glands for holes with sharp
edges.
The negative terminal on the bat-
tery must be disconnected while
the device is being installed and
connected.
Observe the safety notes from the vehicle manu-
facturer (airbag, alarm systems, on-board com-
puters, immobilisers).
Recycling and disposal
Please use the return and collection systems avail-
able to dispose of the product.

Declaration of conformity

The Blaupunkt GmbH declares that the Bluetooth/
USB Interface device complies with the basic re-
quirements and the other relevant regulations of
the directive 1999/5/EG.
24
Dear customer,
the fi rmware "SW8625VW" for the Bluetooth USB
interface (BT-USB interface, 7607 545 500 001)
is now available and provides several new func-
www.blau-
tions that we would like to explain below.
A signifi cant innovation since SW8625VW is the
support for the OLED display (7 607 548 500
001)..
Caution:
Before startup of the OLED display, it is nec-
essary to update the fi rmware of your BT-USB
interface (see the
The following instructions assume that the
fi rmware of your BT-USB interface has already
been updated, and the language was set to English
(see the section Settings menu).
This fi rmware can also be used with your PTT like
the previous versions. The OLED-specifi c control
and display options listed below are not available
in this case.

Switch-on

The OLED display switches on automatically as
soon as you switch on your radio or radio naviga-
tion device (RNS).

Switch-off

The OLED display switches off automatically as
soon as you switch off your radio or radio naviga-
tion device (RNS).
You can also switch off the display manually; to
do so, press and hold the red phone button for
longer than 5 seconds. The buttons remain illumi-
nated to improve navigation at night.
In the "Display -> Standby" Settings menu, you
can preselect a time after which the display au-
tomatically switches off with switched-on radio,
e.g. to reduce a possible distraction of the driver.
(see the section Software update). Software update).