Specifications - Bosch D9412G Installation Manual

7.4 System Commands Supported by
the D720 Series
The following commands are supported by the D720
Series:
Table 6: Keypad supported commands
Function
Bypass a Point
Unbypass a Point
Master Arm
Master Arm Instant
Perimeter Instant
Perimeter Delay
Send Report
Remote Program
Walk Test
Reset Sensors
Delete Passcode
Change Passcode
Fire Test
Watch Mode
User Command 7
Perimeter Partial
User Command 9
8.0 How to customize User's
Guide for System Owner
In the D720 Series User's Guide (P/N: 71-06898-000),
check the appropriate boxes on the pages describing
system commands so the end user knows
a. whether a function is available and
b. whether a passcode is required for the
function.
Bosch Security Systems | 8/04 | 74-06918-000-F
D720 Series | Installation Guide | 8.0 How to customize User's Guide for System Owner
Command
CMD 0
CMD 00
CMD 1
CMD 11
CMD 2
CMD 3
CMDs 41 & 42
CMD 43
CMD 44
CMD 47
CMD 53
CMD 55
CMD 58
CMD 6
CMD 7
CMD 8
CMD 9

9.0 Specifications

Table 7: D720 Series Specifications
Operating Nominal 12 VDC
Voltage
Current Keypad Idle
Requirements
Maximum
Dimensions 4.6 in. x 8.2 in. x 0.8 in.
(H x W x D) (11.7 cm x 20.8 cm x 20.8 cm)
Wiring A four-conductor, quick-connect, plug-
in cable is provided for interfacing with
the compatible control panels (refer to
Table 1)
Operating +32°F to +122°F
Temperature (0°C to +50°C)
Non-condensing 5% to 85% @ +86°F (+30°C)
Relative Humidity
20 mA
100 mA
7