How To Use; Extension Tube Release Button - Vax VX6 User Manual

Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and
emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will
automatically turn the vacuum cleaner off . If this happens, switch the vacuum cleaner off and unplug from electrical socket. Remove
and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for approximately 1
hour (if you have cleaned the fi lters please wait 24 hours for the fi lters to fully dry before putting back into the vacuum).
• For best cleaning results fi lters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the off position.
Twist the quick release
cord hook to release the
power cord.
vax.com.au
vax.co.nz
Plug in the machine.
Press the three way on/off
switch to turn on.

How To Use

Place your foot gently
onto the fl oorhead and pull
the handle back to recline
the machine.
To release the handle with
extension tube press the
extension tube release
button and lift the handle
to remove.
6