Vax VX6 User Manual
Vax VX6 User Manual

Vax VX6 User Manual

Performance floors & all pets & family

Advertisement

Performance
Floors & All
Pets & Family

User Guide

vax.com.au
vax.co.nz
VX6

Advertisement

Table of Contents
loading

Summary of Contents for Vax VX6

  • Page 1: User Guide

    Performance Floors & All Pets & Family User Guide vax.com.au vax.co.nz...
  • Page 2: Table Of Contents

    Contents Contents Machine Overview General Safety Information Getting Started How To Use Looking After Your Machine FAQs Other Information...
  • Page 3: Machine Overview

    Three way on/o switch Separator Dirt container Post motor lter Hose to machine connector Hose to handle connector Hose Extension tube release button Quick release cord hook Power Cord TurboTool Pre-motor lter 2 in 1 tool Post-motor lter vax.com.au vax.co.nz...
  • Page 4: General Safety Information

    7. The appliance should only be used as described in this user guide. 8. Only Vax recommended attachments should be used with this appliance. 9. Do not use this vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into water. Do not use this vacuum cleaner with a damaged cord or plug.
  • Page 5: Hose

    Maintaining your carpets and hard floors will ensure they keep their appearance for longer. You’ve chosen carpets and hard floors for your home for a reason and Vax will help you take good care of them. Taking care of your Performance Floors & All Also inside this guide are instructions on maintaining your new machine, so that it’s always ready when you are to...
  • Page 6: Getting Started

    Getting Started Assembling your upright Place the dirt container onto the Align the main body with the fl oor head Push the hose into the hose to machine main body and click into position. and push into place. connector and twist to lock into position. Insert the extension tube into the top of Push the hose into the hose clips Wrap the power cord around the quick...
  • Page 7: How To Use

    Press the three way on/off onto the fl oorhead and pull extension tube press the power cord. switch to turn on. the handle back to recline extension tube release the machine. button and lift the handle to remove. vax.com.au vax.co.nz...
  • Page 8 How To Use Using the fl oorhead without the main body To remove the canister Put the main body to one Press extension tube release Press handle release button, from the main body of the side, use fl oorhead for button and lift the handle to pull extension tube to vacuum cleaner: Hold the...
  • Page 9: Looking After Your Machine

    The dirt container is now locked in place. vax.com.au vax.co.nz...
  • Page 10 Looking After Your Machine NOTE: For best cleaning results fi lters require cleaning at least every three months. Cleaning the pre-motor fi lter Turn the dirt container lid anti-clockwise Grasp tab on fi lter and pull to remove. Tap the fi lter over a bin to release and lift to remove.
  • Page 11 Lift the shroud from the dirt container Wash the shroud under running water C) and leave to fully dry for and tap over a bin to remove dirt (Max 40 and debris. at least 24 hours before replacing back into the dirt container. vax.com.au vax.co.nz...
  • Page 12: Removing Debris From The Brushbar

    Looking After Your Machine Cleaning the post motor fi lter Press button on post motor Pull the post motor fi lter from Tap the post motor fi lter over a bin to fi lter cover and remove. the machine. remove any dirt and debris and replace it into the machine.
  • Page 13: Changing The Belt

    Loop new drive belt around front, remove 5 screws to the spindle rst and then release brushbar cover. onto the brushbar. Insert the brushbar back into oor head and replace the brushbar cover, insert 5 screws to secure. vax.com.au vax.co.nz...
  • Page 14: Faqs

    • The belt may be broken, go to ‘Looking after your machine – changing the belt’, on page 12. we’re here to help For troubleshooting please call or visit our website: AU: 1300 361 505 vax.com.au NZ: 0800 800 900 vax.co.nz...
  • Page 15: Other Information

    8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
  • Page 16 Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. www.vax.com.au Careline AU: 1300 361 505 www.vax.co.nz Careline NZ: 0800 800 900 vax.com.au Performance is everything. vax.co.nz...

Table of Contents