Related Manuals for Vax Power Advance VX77
Summary of Contents for Vax Power Advance VX77
- Page 1 Power Advance VACUUM CLEAN CYCLONIC BARREL VACUUM LET’S GET STARTED. vax.com.au VX77 vax.co.nz...
-
Page 2: Let's Talk Safety
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. READ ALL THE INSTRUCTIONS BEFORE USING Basic THIS APPLIANCE safety • Only use the vacuum cleaner indoors and keep the area you’re precautions cleaning well lit. - Page 3 • Only Vax recommend tools and accessories should be used with this vacuum cleaner • Vax recommends the use of a Residual Current Device rating of 30 mA or less. • If the supply cord is damaged, it must be replaced by the manufacturer, or similarly qualified person in order to avoid a hazard, or invalidating the warranty.
- Page 4 Maintaining your carpets will ensure they keep their appearance for longer. You’ve chosen the carpets and hard fl oors for your home for a reason and Vax will help you take good care of them.
-
Page 5: Table Of Contents
Contents Power Advance Barrel Vacuum Included with your machine Let’s talk safety Getting to know your machine Hose and handle Getting started TurboTool Using your machine Dusting brush Taking care of your machine What to do if it goes wrong Crevice tool Getting in touch Upholstery tool... -
Page 6: Getting To Know Your Machine
Voltage 220-240V ~ 50Hz Wattage 2400W Cord length 8m Weight 6.3kg Double This product Indoor Read Insulated meets applicable Instructions Dust Capacity: 4L regulatory Only requirements Subject to technical change without notice. To purchase consumables and accessories, please visit vax.com.au Made in China. -
Page 7: Getting Started
CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. Keep your Vax like new IMPORTANT: The condition of the fi lters aff ects the performance of your machine. Please check, clean and replace fi lters periodically (depending on the level of use). -
Page 8: Using Your Machine
Using your machine Operating the appliance Fully unwind the power cord. Adjust the variable power dial to A yellow mark on the cord increase or decrease the suction. indicates the recommended cord length. Do not exceed the cord length beyond the yellow mark. -
Page 9: Taking Care Of Your Machine
Taking care of your machine WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container or before connecting/disconnecting the attachments. IMPORTANT: Filters need to be cleaned every time you empty the dirt container for best cleaning results. Do not use your vacuum cleaner with blocked fi lters and without ALL the fi lters in place. - Page 10 Taking care of your machine Cleaning the pre-motor fi lter IMPORTANT: Water temperature should not exceed 40°C when washing the pre-motor fi lter. Allow to dry completely before replacing in the vacuum cleaner. Tap to remove excess dirt for a quick clean. 40�C max 24hr Wash when a deeper clean...
- Page 11 Taking care of your machine NOTE: The shroud is accessed by removing the dirt container lid and is located underneath the pre-motor fi lter. IMPORTANT: Water temperature should not exceed 40°C when washing the shroud. Allow to dry completely before replacing in the vacuum cleaner. Cleaning the shroud 40�C max 24hr...
- Page 12 Taking care of your machine Cleaning the post-motor fi lter WARNING: Do not wash post-motor fi lter. Tap to clean. Clearing blockages WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket. Hose blockages Accessory blockages The fl exible hose may be disconnected from the vacuum...
- Page 13 Taking care of your machine Removing blockages from the TurboTool Clean the TurboTool by removing Remove the bottom cover (B). Replace the bottom cover, insert the 2 screws (A), located on the Clean out any debris or hair from and tighten the screws. bottom cover, with a crosshead the brushbar and turbine fan.
-
Page 14: What To Do If It Goes Wrong
• We’re here to help. Simply call AUS: 1300 VAX AUS (1300 829 287) What do I do if the unit/ / NZ: 0800 VAX NZL (0800 829 695) or visit vax.com.au... -
Page 15: Getting In Touch
Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. -
Page 16: Accessories
Accessories Don’t forget your accessories! Pro Cleaning Kit Model no. VPCK Crevice tool For awkward gaps and crevices. Upholstery attachment Gently cleans large areas of upholstery, curtains, sofas and chairs. Pet hair removal attachment Tackles stubborn pet hair on furniture, rugs and carpets. Stubborn dust brush attachment Removes built up dust from skirting, banisters and corners. - Page 17 Notes...
- Page 18 Notes...
- Page 19 Notes...
- Page 20 Distributed by Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149, Melbourne, Australia Careline AU: 1300 VAX AUS (1300 829 287) www.vax.com.au Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere, Auckland, 2022, New Zealand Careline NZ: 0800 VAX NZL (0800 829 695) www.vax.co.nz...