Table of Contents
Advertisement
BI440ZX Motherboard Product Guide
This printed circuit assembly has the following product certification markings
x
UL Joint Recognition Mark: Consists of small c followed by a stylized backward UR and
followed by a small US (Component side)
x
Manufacturer's recognition mark: Consists of a unique UL recognized manufacturer's logo,
along with a flammability rating (94V-0) (Solder side)
x
UL File Number for motherboards: E139761 (Component side)
x
PB Part Number: Intel bare circuit board part number (Solder side) 720848-001
x
Battery "+ Side Up" marking: Located on the component side of the board in close proximity
to the battery holder
x
FCC Logo/Declaration: (Solder side)
x
CE Mark: (Component side) The CE mark should also be on the shipping container
Installation Precautions
When you install and test the motherboard, observe all warnings and cautions in the installation
instructions.
To avoid injury, be careful of:
x
Sharp pins on connectors
x
Sharp pins on printed circuit assemblies
x
Rough edges and sharp corners on the chassis
x
Hot components (like processors, voltage regulators, and heat sinks)
x
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.
WARNING
Do not open the power supply. Risk of electric shock and burns from high voltage and rapid
overheating. Refer servicing of the power supply to qualified technical personnel.
Installation Instructions
CAUTION
Follow these guidelines to meet safety and regulatory requirements when installing this board
assembly.
Read and adhere to all of these instructions and the instructions supplied with the chassis and
associated modules. If the instructions for the chassis are inconsistent with these instructions or
the instructions for associated modules, contact the supplier's technical support to find out how
you can ensure that your computer meets safety and regulatory requirements. If you do not follow
these instructions and the instructions provided by chassis and module suppliers, you increase
safety risk and the possibility of noncompliance with regional laws and regulations.
42
Hide quick links:
Advertisement
Table of Contents
