Log; Call Waiting - Nokia N95 User Manual

If you do not want to answer a call, press
activated the Tools
Voice calls > If busy
an incoming call also forwards the call. See
forwarding", on page 108.
When you select Silence
incoming call, you can send a text message without
rejecting the call informing the caller that you cannot
answer the call. Select
set up this option and write a standard text message, see
"Call", on page 107.

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone >
To answer the waiting call, press
on hold.
To switch between the two calls, select
To connect an incoming call or a call on hold with an active
call and to disconnect yourself from the calls, select
Options > Transfer. To end the active call, press
end both calls, select
88 Copyright © 2007 Nokia. All rights reserved.
. If you have
> Settings > Phone > Call forward
function to forward calls, declining
"Call
to mute the ringing tone of the
Options > Send text message. To
Call waiting in Tools
Call > Call waiting (network service).
. The first call is put
Options
Options > End all calls.

Log

>
To monitor the phone numbers of missed, received, and
dialed voice calls, press
Log > Recent
received calls only if the network supports these functions,
the device is switched on, and within the network service
area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press
Call timers
>
To monitor the approximate duration of your incoming and
outgoing calls, press
Log > Call timers.
Note: The actual time invoiced for calls by your
> Swap.
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
. To
timers. For this you need the lock code. See
SIM card", on page 104.
, and select Applications
calls. The device registers missed and
Options
list. To clear an individual event, open a
.
, and select Applications
Options
>
> Clear recent
>
> Clear
"Phone and