Connection; Data Connections And Access Points - Nokia N95 User Manual

Network mode (shown only if supported by the wireless
service provider) — Select which network to use. If you
select Dual mode, the device uses the GSM or WCDMA
network automatically, according to the network
parameters and the roaming agreements between the
wireless service providers. Contact your service provider for
more details.
Operator selection — Select
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display — Select On
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Automatic to set the device
to set the device to indicate

Connection

To edit access point and other connection settings, press
, and select Tools > Settings
Bluetooth, USB, Access points,
LAN, SIP settings, Configurations, or
control.
For Bluetooth connectivity settings, see "Settings", on
page 18. For USB data cable settings, see "USB", on page
21.

Data connections and access points

Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and WCDMA networks, multiple data
connections can be active at the same time, and access
points can share a data connection. In the WCDMA
network, data connections remain active during voice
calls.
You can also use a WLAN data connection. See
LAN", on page 15. Only one connection in one WLAN can
be active at a time, but several applications can use the
same internet access point.
Copyright © 2007 Nokia. All rights reserved.
> Connection >
Packet data, Wireless
Access point name
"Wireless
109