Nokia N95 User Manual page 121

Security settings for
• WPA/WPA2 — Select the means of authentication:
EAP to use an extensible authentication protocol (EAP)
plug-in, or Pre-shared key
Complete the appropriate settings:
•
EAP plug-in settings
settings as your service provider instructs.
• Pre-shared key
password. The same password must be entered on the
WLAN access point device.
•
TKIP encryption
whether Temporal Key Integrity Protocol (TKIP) is used.
Homepage — Define a home page.
Select Options > Advanced settings
following:
IPv4 settings: Phone IP address
device), Subnet mask
gateway (the gateway), and
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
IPv6 settings > DNS address
known, or User defined.
Ad-hoc channel (only for Ad-hoc) — To enter a channel
number (1-11) manually, select
112 Copyright © 2007 Nokia. All rights reserved.
802.1x and WPA/WPA2:
to use a password.
(only for EAP) — Enter the
(only for Pre-shared key) — Enter a
(only for WPA/WPA2) — Select
and from the
(the IP address of your
(the subnet IP address), Default
DNS address. Enter the IP
— Select Automatic,
User defined.
Proxy server address
server.
Proxy port number
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data connection
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker. If there is no packet data
coverage, the device periodically tries to establish a packet
data connection. If you select
uses a packet data connection only if you start an
application or action that needs it.
Access point — The access point name is needed to use
your device as a packet data modem to your computer.
High speed packet access
HSDPA (network service) in WCDMA networks. For more
Well-
information on HSDPA, see
— Enter the address for the proxy
— Enter the proxy port number.
— If you select When available
When needed, the device
— Enable or disable the use of
"Fast downloading", on page 4.