Offline Profile; 3-D Tones - Nokia N95 User Manual

In the tones list, the
service) opens a list of bookmarks. You can select a
bookmark and start connection to a web page to download
more tones.
If you want the caller's name to be spoken when your
device rings, select
caller's name to On. The caller's name must be saved in
Contacts.
To create a new profile, select

Offline profile

The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make
or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
70 Copyright © 2007 Nokia. All rights reserved.
Download sounds link (network
Options > Customize, and set
Options > Create
in the signal strength
must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.
When you have activated the
use the WLAN, for example, to read your e-mail or browse
on the internet. Remember to comply with any applicable
Say safety requirements when establishing and using a WLAN
connection. See
use Bluetooth connectivity while in the
"Bluetooth connectivity", on page 17.
new.
To leave the Offline
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).

3-D tones

Press , and select
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
tone and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory
modify the effect, select from the following settings:
Offline profile, you can still
"Wireless LAN", on page 15. You can also
Offline
profile, press the power key, and select
Tools > 3-D tones. With
3-D ringing tone
and the desired effect. To
profile. See
3-D tones
Ringing