Time Zone; Superimpose Tab - Sony Ipela SNC-CH135 User Manual

NTP server 3: Enter the third choice for NTP server
address.
DHCP server: Select DHCP server when you need to
get NTP server information from DHCP server.
Multicast: Select Multicast when you search for an
NTP server with Multicast.

Time zone

Set the time difference from Greenwich Mean Time in
the area where the camera is installed.
Select the time zone in the area where the camera is
installed from the drop-down list.
For Japan, select "Osaka, Sapporo, Tokyo
(GMT+9:00)"
Automatically adjust the clock for daylight
saving time changes
When selected, the clock is automatically adjusted
according to the daylight saving time of the selected
time zone.
Note
If the time zone selected in Time zone is different from
that set on the computer, the time is adjusted using the
time zone difference and set on the camera.
OK/Cancel
See "Buttons common to every menu" on page 33.

Superimpose Tab

Select whether to superimpose the camera ID, date &
time and other information on the image or not.
The camera ID is also superimposed on images recorded
by the Pre-alarm or Post-alarm function.
Superimpose is applied to Image 1 and Image 2.
Superimpose
On/Off
When using the Superimpose function, select On.
Font size
Set the font size.
Style
Set the items to superimpose and the format to display
in. English one byte characters and symbols are
displayed. Superimpose settings are available for the
following items:
• Date: Set the display settings for date and time.
• Camera ID: Set the display settings for Camera ID
and string.
• Camera direction: Displays the name of a preset
position.
• Event: Configure the display setting for when an
event occurs.
• Zoom: Configure the zoom display.
• Codec: Configure the bit rate and frame rate display
settings. Displays the codec information for Image 1.
• Custom string: Set Custom string to display the text
of your choice.
Display format, including color, can be individually set
for each item.
Color: Select the font color of the superimposed text.
Blink: Select On to enable blinking for the
superimposed text. However, the blinking display is
not available for Date.
String Effect: Enable a string effect for displayed text.
Advanced: When you click the Setting button in Date,
the Date & time menu is displayed and you can set
the necessary options.
Format: Select the format for date and time.
Separator: Select the separator for time display.
When you click the Setting button in Camera ID, the
Camera ID menu is displayed and you can set the
necessary options.
Configuring the System — System Menu
37