Picture Tab - Sony Ipela SNC-CH135 User Manual

Note
If you click the buttons in this tab, in order to adjust the
focus/zoom easily, the settings below are temporarily
changed:
– Privacy masking and Cropping is deactivated.
– The current image focus position is superimposed.
– The alarm of Motion detection is deactivated.
Adjusting the zoom
Click the –500, –100, –10, +10, +100 or +500 buttons to
adjust the zoom position accordingly.
Note
The focus is moved slightly after adjusting; adjust the
focus again, as necessary.
Adjusting the focus
Click Start button in Easy Focus to set the focus to the
optimum position.
Note
The most suitable focus may not be available depending
on imaging conditions. If so, click the –20, –5, –1, +1,
+5, +20 buttons to adjust the focus.

Picture Tab

You can set the color conditions, exposure, etc., of the
camera.
Preview screen
Preview the image and adjust the picture setting.
For details on each button, refer to the Control bar of the
Plug-in free viewer (page 24).
View-DR
In high-contrast scenes such as against a back light, this
function reduces overexposure and underexposure.
Select On to turn on the View-DR function.
Notes
• When the View-DR function is on, exposure-related
settings cannot be configured.
• If "Turn off in Night mode" is checked, the View-DR
setting will turn off automatically in night mode.
Visibility Enhancer
Using the Visibility Enhancer function will make the
darker part of a camera image brighter as well as
automatically correct brightness and contrast to show
bright parts clearly without overexposure. When the
Visibility Enhancer is On, select the correction level:
Low, Middle or High. If you set it to Off, it will disable
the Visibility Enhancer and activate the AGC function.
Note
When View-DR is On, the Visibility Enhancer is fixed
to On.
Exposure
Adjust the settings of exposure.
Exposure compensation
Select the exposure correction value from the list box to
adjust the target brightness for the automatic exposure
setting.
A larger value brightens the image, and a smaller value
darkens the image. Selectable values are as follows:
+2.0, +1.6, +1.3, +1.0, +0.6, +0.3, 0, –0.3, –0.6, –1.0,
–1.3, –1.6, –2.0
Note
This cannot be selected when Visibility Enhancer is On.
AGC
Select the gain-controlled automatic exposure setting
level: Low, Middle or High.
If you select Off, the automatic exposure setting by gain
control is not performed.
Note
This cannot be selected when Visibility Enhancer is On.
Setting the Camera Image and Audio — Camera Menu
43