Sony Ipela SNC-CH135 User Manual page 103

Note
Image 1 is automatically displayed on the monitor
screen if the selected camera from the Camera list is as
follows:
– Image2: Codec of Image 2: Off.
– Image3: Image 3 function is not installed, or Codec of
Image 3: Off.
You can check the settings for codec in Camera menu-
Video codec tab.
Initial PTZ
Set the pan/tilt/zoom operation modes for streaming.
No PTZ: PTZ is not available when streaming starts.
Area zoom: Area zoom is available when streaming
starts.
PTZ control bar: Display the PTZ operation bar when
streaming starts.
Vector dragging: Vector drag is available when
streaming starts.
Tip
This device is not equipped with operational functions
for PTZ.
Initial frame rate
Set the initial camera image frame rate.
Initial image
Set what to initially display on the camera image display
area.
Still image: JPEG still images are acquired from the
camera and displayed at start-up.
Specified image (URL): Specify a still image of your
choice by URL at start-up.
Auto play: Run to start playback.
Blank: No display at start-up.
Click to start streaming: By checking this when Still
image or Specified image is selected, you can start
play by clicking on the image.
Tip
If the menu display is Off, Blank cannot be selected.
Initial sound
Set the initial volume for when streaming starts. Check
Muting for muting sound.
Note
This setting is valid only when SNC ActiveX viewer is
selected for Streaming method from Setting of the
Plug-in free viewer control bar.
Show menu
Set whether to show or hide operation buttons at the
bottom of the camera image area.
Select On to display the menu, select Off to hide the
menu.
When On is selected, the items below can be set:
Streaming: Displays the setting options of Streaming,
if it is checked.
Image size: Displays the setting menu of Image size, if
it is checked.
Frame rate: Displays the setting menu of Frame rate,
if it is checked.
Preset position: Displays the setting menu of Preset
position, if it is checked.
Trigger: Displays the setting options of Trigger, if it is
checked.
PTZ operation: Displays the setting menu of PTZ
operation mode, if it is checked.
Sound: Displays the setting menu of Sound, if it is
checked.
Capture image: Displays the Capture image button, if
it is checked.
Image codec: Displays the setting menu of Image
codec, if it is checked.
OK/Cancel
See "Buttons common to every menu" on page 33.
Configuring the Viewer — Viewer Menu
103