Panasonic KX-FT901CX-B Service Manual page 44

KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S
Code Function
594 Setting the overseas DIS
detection
595 Setting an acceptable
reception error value
596 Setting the transmit level
598 Receiving Sensitivity
710 Memory clear except
History data
717 Transmit speed select
718 Receive speed select
719 Ringer off in TEL/FAX
mode
721 Pause tone detect
722 Redial tone detect
731 CPC mode
763 CNG detect time
771 T1 timer
774 T4 timer
775 Monitoring of message
transfer
784 Voice prompt test
815 Sensor check
874 DTMFontime
875 DTMFofftime
882 Journal 3 list
Set Value Effective Range
1: Detects on the 1st 1, 2
time.2: Detects on the
2nd time.
001~999 X number of 001~999
times
- 15~00 15~00
- 43dBm 20~48
1:9600BPS 1~4
2:7200BPS
3:4800BPS
4:2400BPS
1:9600BPS 1~4
2:7200BPS
3:4800BPS
4:2400BPS
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:A 2:B 3:OFF 1, 2, 3
1:10 sec 2:20 sec 1, 2, 3
3:30 sec
1:35 sec 2:60 sec 1, 2
00~99 00~99
1:ON 2:OFF 1, 2
060~200ms 060~200
060~200ms 060~200
Default
1 Sets the recognition format of the DIS signal.
1:Detects the first DIS signal sent from the
receiver during FAX transmission. 2:Ignores
the first DIS signal sent from the receiver during
FAX transmission. (See "5. Unit can copy, but
cannot
international communications" in DEFECTIVE
FACSIMILE SECTION (P.64).)
100 Sets the number of acceptable error lines when
the FAX reconstructs the received data.
10 dBm Selects the FAX transmission level.
42 (See "5. Unit can copy, but cannot
transmit/receive long distance or international
communications" in DEFECTIVE FACSIMILE
SECTION (P.64).)
To reset the value to the default one, except
History data. Please restart a power supply
after clearing a memory.
1 Adjusts the speed to start training during FAX
transmission.
1 Adjusts the speed to start training during FAX
reception.
1 Sets the ringer switch off when a call is
received in the TEL/FAX mode.
1 Selects the tone detection for pauses in dialing.
1 Selects the tone detection mode after redialing.
1 Set the CPC signal detection mode from the
converter.
2 Selects the CNG detection time of friendly
reception.
1 Sets a higher value when the response from
the other party needs more time during FAX
transmission.
00
2 If set to ON a message can be monitored from
this unit´s SP-PHONE when transferring a
message.
You can hear the voice prompt from speaker
after pressing "START" key.
Press "START/SET".
090
090
See PRINT TEST PATTERN (P.46).
44
Remarks
transmit/receive long distance
----------
----------
or