KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S
3.3.3.
RECORDING PAPER
1
Open the cover by pressing the cover open button (
2
Install the recording paper.
3
Insert the leading edge of the paper into the opening above the
thermal head (
).
4
Pull the paper out of the unit.
· Make sure that there is no slack in the paper roll.
).
5
Close the cover securely by pushing down on.
6
KX-FT901CX
Tear off the excess paper by pulling it towards you.
6
KX-FT903CX
Press [FAX/START] to cut the paper.
Note:
· If the paper is secured with glue or tape, cut approximately
15 cm from the beginning of the roll before installing it.
· When the power cord is connected, a message is printed
each time the cover is opened then closed. If the recording
paper is installed upside down, the massage will not be
printed. Install the paper correctly.
14