Safety Warning - Vertex Standard VX-2100 Operating Manual

Hide thumbs Also See for VX-2100:
Table of Contents

Advertisement

You now have at your fingertips a valuable communications tool: a Vertex Standard two-way
radio! Rugged, reliable and easy to use, your Vertex Standard radio will keep you in constant
touch with your colleagues for years to come, with negligible maintenance downtime.
Please take a few minutes to read this manual carefully. The information presented here will
allow you to derive maximum performance from your radio, in case questions arise later on.
We're glad you joined the Vertex Standard team. Call on us anytime, because communica-
tions is our business. Let us
WARNING - DO NOT operate the VX-2100/-2200 radio when any person(s) (by-
standers) outside the vehicle are within the distances shown in the chart at the bot-
tom of this section.
Safety Training information:
Antennas used for this transmitter must not exceed an antenna gain of 0 dBd. The
radio must be used in vehicle-mount configurations with a maximum operating
duty factor not exceeding 50 %, in typical Push-to-Talk configurations.
This radio is restricted to occupational use, work related operations only where the
radio operator must have the knowledge to control the exposure conditions of its
passengers and bystanders by maintaining the minimum separation distance shown
below.
Antenna Installation:
For rear deck trunk installation, the antenna must be located at least the following
distance away from rear-seat passengers.
For roof top installations, the antenna must be placed in the center of the roof.
Warning!
The 70.7 V RF voltage (@45/50 W/50 W) or 50.0 V RF voltage (@25 W/50 W) is
applied to the antenna terminal of the transceiver while transmitting.
Do not touch the TX RF section absolutely while transmitting.
Caution: The radio can become hot.
 Do not operate this radio continuously in transmission mode for longer than 7
minutes. Ensure enough standby/reception time for cool-down between trans-
mission periods. Be sure that TOT timer is correctly installed and properly
working. Avoid touching the rear bottom of the transceiver's body while trans-
mission.
 Do not install this radio in a confined space such as a book case or similar unit.
 Provide a few centimeters of space on either side of the radio.
Congratulations!
help you get your message across.
S
/W
afety
arning
Unsafe Radiation Distance
VHF Model
25 W
3.3 Feet (1 m)
45/50 W
4.6 Feet (1.4 m)
i
nformation
UHF Model
2.6 Feet (0.8 m)
3.9 Feet (1.2 m)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-2200Vx-2200

Table of Contents