E Ncryption ( O Ption ) - Vertex Standard VX-2100 Operating Manual

t a
alk roUnd
Press (or press and hold) the assigned programmable key to activate the Talk
Around feature when you are operating on duplex channel systems (separate re-
ceive and transmit frequencies, utilizing a "repeater" station). The Talk Around
feature allows you to bypass the repeater station and talk directly to a station that
is nearby. This feature has no effect when you are operating on "simplex" chan-
nels, where the receive and transmit frequencies are already the same.
In the VX-2200 , when the "TA" function is activated, the " " icon will be indi-
cated on the display.
Note that your dealer may have mode provision for "Talk Around" channels by
programming "repeater" and "Talk Around" frequencies on two adjacent channels.
If so, the key may be used for one of the other Pre-Programmed Functions.
ta Scan
The "TA SCAN" is one of "DW Scan" between Rx and Tx frequency. It works the
Rx channel as priority channel and the radio will always transmit on the Tx Chan-
nel if the PTT is pressed in the TA SCAN mode.
Press (or press and hold) the assigned programmable key to activate/deactivate the
TA SCAN feature.
( o
e
ncryption
When the Voice Scrambler feature is enabled, press (or press and hold) the as-
signed programmable key to toggle the voice encryption on and off.
In the VX-2200 , when the Voice Scrambler feature is activated, the " " icon will
be indicated on the display.
e
mergency
The VX-2100/-2200 series include an "Emergency" feature which may be use-
ful if you have someone monitoring on the same frequency as your transceiver's
channel.
Press (or press and hold) the assigned programmable key to initiate an emergency
call. For further details contact your Vertex Standard dealer.
reSet
Press (or press and hold) the assigned programmable key to reset the RFC (Ready
for Communication) condition, or to reset the keypad entry condition.
14
a
dVanced
( ta )
)
ption
VX-2100/-2200 S
O
peratiOn
erieS
O M
perating anual