Table of Contents
Advertisement
3.
Lift the load lever in the direction of the
arrow to a 135º angle.
4.
Lift the load plate with your thumb and
forefinger to a 100º angle (4A), then
push the PnP cap from the load plate
window to remove (4B).
5.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom-left corner of the socket then fit
the socket alignment key into the CPU
notch.
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending the
pins and damaging the CPU.
1-8
4B
3
CPU notch
Alignment key
Chapter 1: Product introduction
PnP cap
Load plate
4A
Gold
triangle
mark
Advertisement
Table of Contents
