Interactive Status; Figure 4-10 Interactive Status Led Display - Motorola DH6200 Installation Manual

4 DIAGNOSTICS

Interactive Status

This diagnostic describes the interactive information that is displayed only when Thin
Client platform is running. The information on the OSD and front panel is updated at
least once every 5 seconds while the diagnostic is displayed. This is an example of a
code module display with status descriptions:
Figure 4-10 Interactive status front panel display
The Interactive Status fields are:
Field
IP Address
UPM
Upstream
ID
Downstrea
m ID
State
Description
The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
DCH6200. 0.0.0.0 is displayed if the IP address is not configured or unknown.
The upstream modem address value is the same as the terminal ID assigned by the
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH6200.
0000 is displayed if the Upstream ID is not configured or unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH6200.
0000 is displayed if the Downstream ID is not configured or unknown.
The interactive status of the DCH6200:
LED OSD
U UNCONFIG
C MAC_CONNECT
Description
The DCH6200 is not configured for the interactive system
and platform should run as pre-interactive.
The DCH6200 is waiting to establish connection to MAC PID
Stream.
55