Motorola DH6200 Installation Manual page 58

4 DIAGNOSTICS
The Interface Status fields are:
Field
DOCSIS Tuner & Xmitter
1394 I/O Device
USB I/O Device
Ethernet Device
IR Xmit
Smart Card
SPDIF
DVI/HDMI Port
Device Connected
Repeater
Video Xmission
(transmission)
HDCP Enabled
Output Format
Aspect Ratio
EDID Data
Description
Indicates if enabled; indicates if active
Indicates if enabled; indicates if active
Indicates if enabled; indicates if active
Indicates if enabled; indicates if active
Indicates if enabled; indicates if active
Indicates if enabled; indicates if active
Indicates if enabled; indicates if active
If a device is connected to the HDMI port only, the following diagnostics
display to help troubleshoot the HDMI interface. They all display "N/A" if
no device is connected to the HDMI port or the value is invalid or cannot
be retrieved.
Indicates whether a device is connected to the HDMI port — Yes or No.
Indicates whether the connected device is a repeater — Yes or No.
Indicates whether the DCH6200 is transmitting video over the HDMI port
— Not Active or Active.
Indicates whether the DCH6200 is using HDCP to encrypt video
transmitted over the HDMI link — Yes or No. If the Video Xmission
status is Not Active, the HDCP Enabled status is No.
Indicates the timing format of the video sent through HDMI:
1920 x 1080I — 1920 pixels wide by 1080 pixels high, interlaced
1280 x 720P — 1280 pixels wide by 720 pixels high, progressive
720 x 480P — 720 pixels wide by 480 pixels high, progressive
720 x 480I — 720 pixels wide by 480 pixels high, interlaced
640 x 480P — 640 pixels wide by 480 pixels high, progressive
Indicates the aspect ratio of the video sent through HDMI — 4:3 or 16:9.
Indicates the video timing formats that were read from the Extended
Display Identification Data (EDID) registers for the connected device, in
particular the detailed timing description blocks. The list displays all of
the formats that the DCH6200 could read up to a maximum of 12
formats. If the DCH6200 cannot read any formats, EDID Data is blank.
An asterisk (*) after the aspect ratio means the DCH6200 supports the
format. If more than twelve video timing formats are discovered, the
supported formats only are listed first followed by any remaining
formats, up to twelve.
48