Function Code Transmit
When this selection is enabled and function codes
are contained within the scanned data, the scanner
transmits the function code to the terminal. Charts
of these function codes are provided in your User's
Guide. When the scanner is in keyboard wedge
mode, the scan code is converted to a key code
before it is transmitted.
Enable
(Default)
Disable
Data Format Editor Instructions
The following are abbreviated instructions for
entering a data format. For complete instructions
refer to your User's Guide, available at our website,
www.honeywellaidc.com.
1. Scan the Enter Data Format symbol.
2. Primary/Alternate Format: scan 0 for Primary
Format
3. Terminal Type: scan 099 for any terminal type
4. Code I.D.: scan 99 for any bar code type
9