Telephone operation
Options while on calls
Volume control
You
can set the listening volume to one of six levels.
While on a call, press q
press p
/VOLUME to increase the listening volume.
DIR
NOTES:
•
Handset and speakerphone volume settings are independent.
•
When the volume reaches the minimum or maximum setting, you hear two beeps.
Call waiting
If you subscribe to call waiting service from your telephone service provider,
and someone calls while you are already on a call, you hear two beeps.
•
Press
PHONE
take the new call.
•
Press
PHONE/
forth between calls.
NOTE: Missed call waiting calls are not counted as missed calls.
Mute
Use the mute function to turn off the microphone. You
can hear the caller, but the caller cannot hear you.
To mute a call:
• While on a call, press MUTE/
the handset shows Muted for a few seconds and MUTE
icon displays until you turn off mute.
To end mute a call:
• Press MUTE/
Microphone ON appears temporarily on the handset.
/VOLUME to decrease or
CID
/FLASH on the handset to put your current call on hold and
FLASH on your handset at any time to switch back and
again. When mute is off,
DELETE
. When mute is on,
DELETE
25
Muted
MUTE
6:30
AM
8/06
Microphone ON
6:30
8/06
AM