Grounding Instructions - Windsor MERIT
1500 Operating Instructions Manual

ELECTRICAL:
This high-speed burnisher is designed to
operate on a standard 15 amp, 115 volt, 60 hz,
AC household current. Check that the voltage
shown on the serial number plate is suitable for
the supply available. Voltages below 105 volts
or above 125 volts could cause damage to the
motor.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should
malfunction or break down, grounding provides
a path of least resistance for electric current to
reduce the risk of electric shock. This
appliance is equipped with a cord having an
equipment-grounding conductor and grounding
plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes
and ordinances.
This appliance is for use on a nominal 120-volt
circuit, and has a grounded plug that looks like
the plug in "Fig. A". A temporary adaptor that
looks like the adaptor in "Fig . C" may be used
to connect this plug to a 2-pole receptacle as
shown in "Fig. B", if a properly grounded outlet
is not available. The temporary adaptor should
be used only until a properly grounded outlet
(Fig. A) can be installed by a qualified
electrician. The green colored rigid ear, lug, or
the like extending from the adaptor must be
connected to a permanent ground such as a
properly grounded outlet box cover. Whenever
the adaptor is used, it must be held in place by
a metal screw.
! WARNING
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock.
electrician or service person if you are in
doubt as to whether the outlet is properly
grounded. Do not modify the plug provided
with the appliance - if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
M1500 98334 06/29/99
GROUNDING INSTRUCTIONS
Check with a qualified
7