Asus MAXIMUS VII IMPACT User Manual page 174

DIGI+ Power Control
DIGI+ Power Control utility allows you to adjust the CPU and DRAM power settings for
optimal system efficiency, and overall system stability and performance.
Adjusting the CPU Power
Click or tap to switch
between screens
CPU Power Phase Control
Increase the phase number under a heavy system load to get more transient and
better thermal performance. Reduce the phase number under a light system load
to increase the VRM efficiency.
* The system automatically sets the default to [Extreme] when using the Intel
CPU VRM Switching Frequency
Enables spread spectrum to enhance system stability.
CPU Current Capability
CPU Current Capability provides a wider total power range for overclocking.
A higher value brings a wider total power range and extends the overclocking
frequence range simultaneously.
CPU Power Thermal Control
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the overclocking potential.
CPU Load-line Calibration
It allows you to adjust the voltage range to control the CPU Load-line. Adjust to a
high value for system performance or to a low value for power efficiency.
CPU Power Duty Control
CPU Power Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
Active Frequency Mode
Active Frequency Mode allows you to enhance the power saving condition of the
CPU. Tick ON to get a quicker transient response while saving the CPU power.
4-14
Click or tap to undo
the changes
Click or tap to
apply the changes
iGPU.
®
Chapter 4: Software support