Asus MAXIMUS VII IMPACT User Manual page 112

PCH ICC Voltage [Auto]
Power Supply for the Integrated Clock Controller. Lower may be better.
Clock Crossing VBoot [Auto]
This item allows you to increase the value of the clock crossing voltage boot when
the rising edge of BCLK DN is equal to the falling edge of the BCLK DP. Use the
<+> or <-> key to adjust the value. The values range from 0.1V to 1.9V at 0.00625V
increment.
Clock Crossing Reset Voltage [Auto]
This item allows you to increase the value of the clock crossing reset voltage when
the rising edge of BCLK DN is equal to the falling edge of the BCLK DP. Use the
<+> or <-> key to adjust the value. The values range from 0.1V to 1.9V at 0.00625V
increment.
Configuration options: [Auto] [0.1000] - [1.9000]
Clock Crossing Voltage [Auto]
This item allows you to increase the value of the clock crossing voltage when the rising
edge of BCLK DN is equal to the falling edge of the BCLK DP. Use the <+> or <-> key
to adjust the value. The values range from 0.1V to 1.9V at 0.00625V increment.
Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.
Enhanced Intel SpeedStep Technology [Enabled]
This item allows the operating system to dynamically adjust the processor voltage and
cores frequency which decreases the average power consumption the average heat
production.
Configuration options: [Enabled] [Disabled]
Turbo Mode [Enabled]
This item allows you to enable your core processor's speed to run faster than the
base operating frequency when it is below operating power, current and temperature
specification limit.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the Turbo Mode to [Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
This item allows you to limit the Turbo Ratio's time duration thay exceeds the TDP
(Thermal Design Power) for maximum performance. Use the <+> and <-> keys to
adjust the value. The values range from 1W to 4096W.
Package Power Time Window [Auto]
Also known as Power Limit 1, this item allows you to maintain the time window for
Turbo Ratio over TDP (Thermal Design Power). Use the <+> and <-> keys to adjust
the value. The values range from 1 second to 127 seconds.
3-26
Chapter 3: BIOS setup