Brother HL-4200CN Service Manual page 345

P/J Coordiates
474 G-54 Connects Solenoid Feed and PWBA HBN DRV
475 H-53 Connects Clutch ASSY Turn and PWBA HBN DRV
511 I-7 Connects Holder ASSY MQ-Y (TNR Motor) and PWBA HBN DRV
512 I-6 Connects Holder ASSY MQ-M (TNR Motor) and PWBA HBN DRV
513 J-6 Connects Holder ASSY MQ-C (TNR Motor) and PWBA HBN DRV
514 J-6 Connects Holder ASSY MQ-K (TNR Motor) and PWBA HBN DRV
701 G-6 Connects Holder ASSY MQ-Y (Sensor No Toner) and PWBA HBN DRV
702 H-6 Connects Holder ASSY MQ-M (Sensor No Toner) and PWBA HBN DRV
703 H-6 Connects Holder ASSY MQ-C (Sensor No Toner) and PWBA HBN DRV
704 H-6 Connects Holder ASSY MQ-K (Sensor No Toner) and PWBA HBN DRV
Connects Plate ASSY Dispenser L (CONN ASSY CRUM MC) and Harness
710 D-6
ASSY EEPROM
810 H-54 Connects Option Feeder and MCU HL-4200
1361 B-32 Connects Harness ASSY Front 1A and Chute ASSY In (ADC Sensor ASSY)
2361 E-37 Connects Harness ASSY TMPNCS and Sensor HUM Temp
2362 E-36 Connects Harness ASSY TMPNCS and Fuser ASSY
3411 G-36 Connects Harness ASSY RFID and PWBA CRUM Reader
5011 F-35 Connects S-HVPS and MCU HL-4200
5020 E-35 Connects S-HVPS and Chute ASSY In
5030 E-35 Connects S-HVPS and Chute ASSY In
Remarks
VII-3