Brother HL-4200CN Service Manual page 232

Cyan Toner Cartridge Detached FIP
Step
Initial setting
Check the following for evidence of fault.
Cartridge replacing condition
Toner cartridge switch ASSY (C) replacing
1 condition
Toner cartridge switch ASSY (C) actuator
replacing condition
Toner cartridge switch ASSY (C)
connector replacing condition
Checking toner cartridge switch ASSY
Does toner cartridge switch ASSY function
2 normally?
Using diagnostic tool, check by digital
input test.
Checking PWBA HBN DRV for signal
3
Is P/J51-29PIN<=>P/J51-30PIN 0VDC?
Checking toner cartridge switch ASSY (C)
4 for signal
Is P/J433-2PIN<=>P/J433-1PIN 0VDC?
Checking toner cartridge switch ASSY (C)
for continuity
5 Is P433-2PIN<=>P433-1PIN of toner
cartridge switch ASSY (C) continuous
normally?
Checking harness ASSY TNR4 for
6 continuity
Is J51<=>J433 continuous normally?
Checking PWBA HBN DRV for signal
7
Is P/J42-6PIN<=>P/J42-14PIN 0VDC?
Checking MCU HL-4200 for signal
8 Is P/J12-25PIN<=>P/12-17PIN of MCU
and HVPS PWBA HBN DRV 0VDC?
Checking harness ASSY DRV2-2 for
9 continuity
Is J12<=>J42 continuous normally?
Check
V-26
Remedy
Yes
Replace the parts Go to step [2]
concerned
Go to step [3]
Replace MCU
Go to step [3]
HL-4200
Go to step [4]
Go to step [7]
Go to step [6] Go to step [5]
Replace toner
cartridge
Go to step [6]
switch ASSY
(C)
Replace
Go to step [7] harness ASSY
TNR4
Replace PWBA
Go to step [8]
HBN DRV
Replace MCU
Go to step [9]
HL-4200
Replace
Replace MCU
harness ASSY
HL-4200
DRV2-2
No
With tool
Without tool