Brother HL-4200CN Service Manual page 212

LCD Display
016-333
Turn OFF the Power.
016-334
Turn OFF the Power.
016-335
Turn OFF the Power.
016-336
Turn OFF the Power.
016-350
Turn OFF the Power.
016-360
Turn OFF the Power.
016-361
Turn OFF the Power.
016-370
Turn OFF the Power.
Initialising
Press set
Duplex Jam
Open B-Cover
Fuser Jam
Open A/B-Cover
Regi. Jam
Open A-Cover
Feed Jam
Check Tray
< Name of Fail>
Contents of Trouble
<NIC Flash ROM Application Module Checksum Error>
<NIC MAC Address Checksum Error>
<NIC Ethernet BIST parity/RAM R/W Error>
<NIC Internal Loopback Error>
<IEEE1284 Data Error>
Detected by IEEE1284 controller.
<PCI Option#0 Fail>
PCI option 0 detection error
<PCI Option#1 Fail>
PCI option 1 detection error
<IOT-ESS Communication Fail >
Communication fail between IOT and ESS
<NVM Fail >
Checking that values wrote at NVM Initializing have been retained in the
specified area on NVM.
<IOT Duplex JAM>
Duplex jam sensor cannot detect passage of paper within specified time.
<IOT Fuser JAM>
Exit sensor cannot detect passage of paper within specified time.
<IOT Regi JAM>
Regi sensor cannot detect passage of paper within specified time.
<IOT Feed JAM>
Regi sensor cannot detect passage of paper within specified time.
V-6
Action Reference
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Perform usual startup by
2.3.1
Key On to initialize NVM.
2.3.3
Remove the jammed paper. 2.9.4
See duplex JAM FIP 2.9.6
Remove the jammed paper. 2.9.1
See fuser JAM FIP 2.9.6
Remove the jammed paper. 2.7.6
See Regi JAM FIP 2.7.7
Remove the jammed paper. 2.7.6
See feed JAM FIP 2.7.7
BSD