Parkview Rear Back-Up Camera; Blind Spot Monitoring - Dodge 2011 Durango User Manual

OPERATING YOUR VEHICLE
®
PARKVIEW
• You can see an on-screen image of the rear of your vehicle whenever the shift lever
is put into REVERSE. The ParkView
displayed on the radio display screen, located on the center stack of the
instrument panel.
• If the radio display screen appears foggy, clean the camera lens located on the
liftgate.
Drivers must be careful when backing up even when using the ParkView
Back-Up Camera. Always check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other vehicles, obstructions, or blind spots
before backing up. You must continue to pay attention while backing up.
Failure to do so can result in serious injury or death.

BLIND SPOT MONITORING

• The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located
inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles,
trucks, motorcycles etc.) that enter the blind spot zones from the rear/front/side of
the vehicle.
• The Blind Spot Monitoring (BSM) system warning light, located in the outside
mirrors, will illuminate if a vehicle moves into a blind spot zone.
• The BSM system can also be configured to sound an audible (chime) alert and
mute the radio to notify you of objects that have entered the detection zones.
• Refer to your owner's manual on the DVD for further details.
32
REAR BACK-UP CAMERA
®
WARNING!
Rear Back-Up Camera image will be
®
Rear