Auto Dimming Mirrors; Speed Control - Dodge 2011 Durango User Manual

OPERATING YOUR VEHICLE
Washer Operation
• Rotate the center portion of the lever past the second detent to activate the rear
washer.
High Beam Operation
• Push the lever forward to activate the high beams. Pull the lever toward you for
flash to pass.
NOTE: For safe driving, turn off high beams when oncoming traffic is present to
prevent headlight glare and as a courtesy to other motorists.

AUTO DIMMING MIRRORS

• The rearview and driver side exterior mirror automatically adjusts for headlight
glare from vehicles behind you.
• You can turn the feature on or off by pressing the button at the base of the
rearview mirror. A light next to the button will illuminate to indicate when the
dimming feature is activated.

SPEED CONTROL

Cruise ON/OFF
• Push the ON/OFF button to activate the Speed Control.
• CRUISE READY
Control is on.
• Push the ON/OFF button a second time to turn the system off.
Set
• With the Speed Control on, push and release the SET – button to set a desired
speed.
26
NOTE: The MODE button and DISTANCE
SETTING button are only available on
vehicles equipped with Adaptive Cruise
Control (ACC).
will appear on the instrument cluster to indicate the Speed
• The speed control switches are located
on the steering wheel.