Planet GS-5220-48T4X User Manual page 205

 Hop Limit
ICMP Parameters

Object
 ICMP Type Filter
 ICMP Type Value
 ICMP Code Filter
 ICMP Code Value
TCP/UDP Parameters

Object
 TCP/UDP Source Filter
Specify the hop limit settings for this ACE.
zero: IPv6 frames with a hop limit field greater than zero must not be able
■
to match this entry.
non-zero: IPv6 frames with a hop limit field greater than zero must be able
■
to match this entry.
Any: Any value is allowed ("don't-care").
■
Description
Specify the ICMP filter for this ACE.
Any: No ICMP filter is specified (ICMP filter status is "don't-care").
■
Specific: If you want to filter a specific ICMP filter with this ACE, you can
■
enter a specific ICMP value. A field for entering an ICMP value appears.
When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
value.
Specify the ICMP code filter for this ACE.
Any: No ICMP code filter is specified (ICMP code filter status is
■
"don't-care").
Specific: If you want to filter a specific ICMP code filter with this ACE, you
■
can enter a specific ICMP code value. A field for entering an ICMP code
value appears.
When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
code value.
Description
Specify the TCP/UDP source filter for this ACE.
Any: No TCP/UDP source filter is specified (TCP/UDP source filter status
■
is "don't-care").
Specific: If you want to filter a specific TCP/UDP source filter with this
■
ACE, you can enter a specific TCP/UDP source value. A field for entering a
TCP/UDP source value appears.
205
User's Manual of GS-5220-48T4X