M.2_Ssd (Ngff) Module Installation Guide - ASROCK Fatal1ty Z97M Killer Series User Manual

Hide thumbs Also See for Fatal1ty Z97M Killer Series:
Table of Contents

Advertisement

2.9 M.2_SSD (NGFF) Module Installation Guide

The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The M.2_SSD
(NGFF) Socket 3 can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI
Express module up to Gen 2 x2 (10 Gb/s). Please be noted that the M.2_SSD (NGFF)
Socket 3 is shared with the SATA Express connector; you can only choose either the M.2_
SSD (NGFF) Socket 3 or the SATA Express connector to use.
*he M.2_SSD (NGFF) Socket 3 supports SSD drives. Please note that the WiFi or other
non-SSD M.2 modules are not supported.
Installing the M.2_SSD (NGFF) Module
D
C
B
No.
Nut Location
PCB Length
Module Type
Type2230
4
3
2
1
A
1
2
A
B
3cm
4.2cm
Type 2242
Fatal1ty Z97M Killer Series
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, ind the corresponding nut
location to be used.
3
C
6cm
Type2260
4
D
8cm
Type 2280
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents