Gigabyte GA-990FXA-UD5 User Manual page 87

For the Marvell 88SE9172:
Insert the floppy disk containing the SATA RAID/AHCI driver and press <Enter>. Both of the Marvell shared
library and Marvell 91xx SATA Controller need to be installed. Below we assume that you are installing
the 32-bit version. First select Marvell shared library (install first) and press <Enter>. On the next screen,
press <S> to return to the screen in Figure 5. Then select Marvell 91xx SATA Controller 32bit Driver and
press <Enter>. When both of the two drivers appear on the confirmation screen, press <Enter> to continue
the driver installation.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
Marvell shared library (install first)
Marvell 91xx SATA Controller 32bit Driver
F3=Exit
Figure 5
- 87 - Appendix