Gigabyte GA-990FXA-UD5 User Manual page 50

& VIA 1394 Controller
Enables or disables the onboard IEEE 1394 function. (Default: Enabled)
& OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type (SATA3 0~SATA3 3 connectors)
Enables or disables RAID for the SATA controllers integrated in the AMD Chipset or configures the SATA
controllers to RAID mode.
Native IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& OnChip SATA Port4/5 Type (SATA3 4~SATA3 5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.
IDE D isables RAID for the SATA controller and configures the SATA controller to IDE mode.
(Default)
& HD Audio Azalia Device
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Onboard USB Device
Enables or disables the integrated USB controller. (Default: Enabled)
& Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& F_USB30 Controller (Etron EJ168 USB Controller, USB 3.0/2.0 ports routed to the
onboard F_USB30 header)
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
& Onboard GSATA Controller (Marvell 88SE9172 chip, GSATA3 6 and GSATA3 7
connectors)
Enables or disables the SATA controller integrated in the Marvell 88SE9172 chip. (Default: Enabled)
& R_USB3.0 Controller (Etron EJ168 USB Controller, USB 3.0/2.0 ports on the back
panel)
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
& Onboard eSATA Controller (Marvell 88SE9172 chip, eSATA connectors on the back
panel)
Enables or disables the SATA controller integrated in the Marvell 88SE9172 chip. (Default: Enabled)
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
BIOS Setup - 50 -