FUNCTIONS COMBINED WITH EXTERNAL DEVICES
Triggering an alarm by using an external
device
This is available when the inputs 1, 2, and/or 3 of this station
*
are set to "UTILITY" in the [INSTALL] menu window during
installation, and an external device, such as a sensor or a
call button, is connected to each of the inputs.
When an external device is triggered
A message is displayed, the external device ID is shown, and
an alarm sounds on all of the master and sub master stations.
*
The duration time of alarm sound depends on setting.
( → P. 15)
*
The alarm will not sound when "ALARM AT DOOR" is set to
"DISABLE" and the volume of call tone from a sub master
station is set to 0.
Door station 1 can be set to sound an alarm and turn on LED
*
light to alert individuals near door station of a problem inside.
( → P. 15)
•
Door stations 2-4 cannot be set to sound an alarm.
To stop the alarm
Touch RESET , or press the [HOME] button.
NOTE:
If two or more inputs are triggered, the latter one takes priority.
Releasing a door with another door
release button
This is available when the inputs 1 and/or 2 of this station is
*
set to "REQUEST TO EXIT" in the [INSTALL] menu window
during installation, and a door release button is connected to
each of the inputs.
The door at the door station 1 or 2, or both doors can be
unlocked by pressing the connected button(s) during a call-in,
communication, or while monitoring a door station.
30
Activating an external device
This is available when an external device is connected to the
*
option contact outputs of this station.
Activating external device
Touch OPTION from HOME window or while communicating
with/monitoring a door station. The device will be triggered.
Transferring alarm to external device
When detecting designated action, this station transfers alarm
to the device.
NOTE:
OPTION is not displayed on the screen.
Using a foot switch
This is available when input 3 is set to "EXT. TALK INPUT"
*
in the [INSTALL] menu window during installation, and a foot
switch is connected.
A foot switch works similarly to touching TALK or END on the
touchscreen.