RECORDING AND PLAYING IMAGES
Recording
■ Automatic recording
This station automatically records images from door station.
Recording starts approximately 2 seconds after receiving a
*
call.
*
While recording, "
REC" blinks on the screen.
The recorded images are stored in the built-in memory or an
SD (or SDHC) card.
If an SD (or SDHC) card is installed, images will
*
automatically be saved to card.
Recording time and number of recorded images differ
*
depending on the media. (See the table below.)
<Recording time and number of recorded images for a single recording action>
Storage Media
Built-in memory
Up to 6 images are recorded (1 for each second).
* 20 times of recording data can be stored.
SD (or SDHC) card
Up to 40 images are recorded (4 for each second).
Blinks
Calls in.
1st
2nd
2 sec.
1 sec.
1 sec.
Calls in.
2 sec.
1 sec.
1 sec.
10 seconds (up to 40 images)
NOTES:
Automatic recording function cannot be cancelled.
•
The display mode (Zoom/Wide) can be set. (
•
switch Zoom and Wide while recording.
The status LED blinks in blue to show there are recorded images
•
that have not been played yet. The LED turns off when PLAY is
touched.
Automatic recording does not begin while monitoring a door
•
station. To save images while monitoring, see manual recording
below.
■ Manual recording
You can also record images displayed on the screen.
Touch MENU
REC when an image is displayed.
→
Manual recording is possible only when
*
on the screen.
The recording is the same with the automatic recording.
*
However, moving the position of zoom mode and switching
Zoom/Wide cannot be made automatically.
NOTE:
Manual recording cannot be performed during automatic recording.
Description
3rd
4th
5th
6th
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
→ P. 20) You can also
MENU is displayed
25