Copy Features; Pc Print Features - Panasonic KX-FLM663HX Operating Instructions Manual

9. Programmable Features
Feature/Code
Resetting fax features to their
default settings
{#}{4}{5}{9}

9.4 Copy features

Feature/Code
Changing the default copy
resolution
{#}{4}{6}{1}
Holding the previous N in 1
setting
{#}{4}{6}{7}
Holding the previous zoom
setting
{#}{4}{6}{8}
Holding the previous collate
setting
{#}{4}{6}{9}

9.5 PC print features

Feature/Code
Changing the data timeout
setting
{#}{7}{7}{4}
56
Selection
{0} "NO" (default)
{1} "YES"
To reset the fax features:
1. {Menu} i {#}{4}{5}{9}
2. Press {1} to select "YES". i {Set} i {Set} i {Menu}
Note:
L The PC fax reception (feature #443 on page 23) will not be reset.
Selection
To change the default resolution setting for copying.
{1} "TEXT/PHOTO": For documents containing both text and photographs.
{2} "TEXT" (default): For documents containing only text.
{3} "PHOTO": For documents containing photographs, shaded drawings, etc.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
Selection
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {Menu} i {#}{7}{7}{4} i {Set}
2. Enter the desired data timeout setting from "005" seconds to "600"
seconds, using the dial keypad.
L The default setting is "060" seconds.
3. {Set} i {Menu}