Placing Cursor On The Ptx Icon; 6.4.1 Delete Ptx; 6.4.2 Goto Ptx; 6.4.3 Mobilarm Ptx List Page - VDO MAP 7w Plus GPS User Manual

If the received PTX is NOT the active one, the user must confirmed to navigate to it.
Otherwise if the received PTX is the active one (the PTX on which we are navigating
to), navigation data are updated in memory, the new PTX coordinates becames
the Destination position and the current Fix position becames the starting position.
The map is not automatically centered on it.
The PTX icon appears at the new position and a pop-up warning window appears.
It is possible to close all menus/data pages (if open) and center the chart on the
received PTX (see Par. 6.4.4). Otherwise you could close the alarm window and
stay on the active screen.
6.4

PLACING CURSOR ON THE PTX ICON

Placing the cursor on the PTX icon shown on the screen, an information window
containing the PTX Identifier, position and status (Overboard or Recovered) appears:

6.4.1 Delete PTX

The Delete PTX function permamently removes the selected PTX from the chart
plotter memory and from the chart display.
Move the cursor over the PTX to delete. Press [ENTER], using the cursor select
"DELETE" and press [ENTER]. A warning pop-up window will be shown. Select
"YES" and press [ENTER].

6.4.2 Goto PTX

The Goto PTX function activates the navigation to the selected PTX.
Press [ENTER], using the cursor select "GOTO" and press [ENTER].
If the navigation is set to the selected PTX, to terminate the navigation press
[ENTER], using the cursor select "STOP GOTO" and press [ENTER].

6.4.3 MOBILARM PTX List Page

The MOBILARM Alarm Status List shows the list of all PTX that returned an alarm
event. To obtain the page press [ENTER], using the cursor select "LIST" and
press [ENTER].
Another mode to select the MOBILARM Alarm status List is the following:
[MENU] + [MENU] + "MOBILARM" + [ENTER]
User Manual
MOBILARM - PTX
OVERBOARD
41°13.334N
009°30.702E
Id Time
000001A0 10:16:79 PM
Fig. 6.4 - Example of PTX information window
69